Indeco Highbay
The Indeco Highbay is designed to provide the quickest and simplest installation of any product in the Dextra range by combining the trunking, electrical system and quick release luminaires in a single system for use in high level applications.
Introduction
The Indeco Highbay is designed to provide the quickest and simplest installation of any product in the Dextra range by combining the trunking, electrical system and quick release luminaires in a single product. Indeco trunking is available in 4.5M, 3M and 1.5M lengths with 6 pole through wire looms, each loom has a socket connector at 1.5M intervals with a corresponding connector on the rear of the luminaire housing. Each trunking length connects to the next with a simple splice plate and plug and socket connector allowing installation of the trunking with no need to wire electrical connections, the luminaires can then be installed in the required positions with twist lock mounting clips and plug and socket electrical connections. The trunking itself is mounted with snap on sprung steel clips ensuring that the entire system can be installed without tools or wiring of electrical connections except for a single connection at the beginning of each trunking run. The Indeco Highbay is available with lumen outputs ranging from 20,000 to 38,000 lumens with open area, high rack and ultra high rack lens variants ensuring a compliant lighting solution can be achieved in racking and marshalling areas at a range of mounting heights with a minimum of energy consumption. Snap in covers allow the trunking to be enclosed between luminaires preventing dust and dirt ingress into the electrical supply system and ensuring a neat and complete appearance to your installation.
The Indeco Highbay is supplied with up to 4 dedicated power circuits using 2.5mm cable (dependent on requirements for DALI and emergency) allowing long runs to be achieved without exceeding Volt drop limitations. Energy savings can be further enhanced with our integral R18 sensor range offering presence detection and daylight regulation up to 18M mounting heights, whilst wireless variants allow for grouped sensor operation, automated emergency testing and centralised reporting of the results eliminating manual testing and reducing operational cost. All emergency variants incorporate lithium iron phosphate batteries for extended warranty and lifetime.
Recommended applications:
Industrial & Manufacturing | Retail | Transport | Warehousing
Specification
Construction
- Housing: 0.7mm CR4 steel
- Finish: Polyester powder painted RAL 9016 textura matt white
- Finish: Mill finish aluminium
- Lens: Injection moulded polycarbonate lens
- IP20
- Trunking: Extruded aluminium
Performance
- Part L2 compliant
- 3SDCM Three step Macadams ellipse
- TM21: L90>60K Hours / L80>100K Hours
- Up to 178 luminaire lumens per circuit Watt.
Environmental
- Designed to allow simple replacement of components with commonly available tools in compliance with the Eco Design Directive, please see the installation leaflet for maintenance instructions.
- All critical components are mounted on a single tray for simple end of life repair or upgrade.
- Powered by European branded drivers and emergency modules ensuring replacement parts are easily sourced.
- Every luminaire is labelled with a unique ID number allowing easy identification of spare parts for the lifetime of the product.
- Contains no single use plastics or polystyrene packaging.
- Supplied in plain card boxes with paper tape ensuring packaging is easily recycled.
- Designed to allow simple disassembly for end of life recycling.
- UK based manufacturing providing local support throughout the product lifetime and minimising transportation miles.
Emergency
- Available with optional standard, self test and autotest integral emergency with lithium batteries for extended warranty and lifetime.
- Optional Reacta-Link wireless emergency for automated centralised reporting.
- Optional Reacta-Control wireless emergency for automated centralised reporting.
Control
- Optional DALI dimming
- Optional compatibility with a range of dimming systems including DALI, DSI and Switch Dimming
- Optional integral Reacta-Link for integration with Reacta-Link wireless installations
- Optional integral Reacta-Control for integration with Reacta-Control wireless installations
- Ground level commissioning with REA-AP controller allows quick and simple setting and adjustment of sensors without the need for costly commissioning.
Installation
- Suitable for suspended installation
- Trunking pre-wired with 6 pole 2.5mm loom with socket connectors allowing installation of luminaires at 1500mm intervals.
- Tool-less assembly for both electrical and mechanical installation.
- Trunking pre-assembled with splice plates and up to 4500mm lengths providing rapid installation.
- Snap on suspension brackets for quick mounting.
Variations
- Available with a wide range of colour temperatures and renderings
- Available in a range of lumen outputs
- Available with three lens variants
Ordering
To order this product simply select the code from each section to build your desired product.
Luminaires
| Trunking | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||||||||||||||||||||
| Luminaires | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
Dimming
| Code | Description |
|---|---|
| A | DALI Digital Addressable Lighting Interface |
| D | DSI Digital Dimming |
| H | HFR Analogue 1-10v |
Control
Emergency
| Code | Description |
|---|---|
| LE3 | Lithium Standard Emergency 3 Hour |
| LS3 | Lithium Selftest Emergency 3 Hour |
| LA3 | Lithium Autotest Emergency 3 Hour |
| LA3D | Lithium DexNET Emergency 3 Hour |
| LSTR | Lithium Reacta-Link Emergency 3 Hour |
| LA3RC | Lithium Reacta-Control Emergency 3 Hour |
Miscellaneous
| Code | Description |
|---|---|
| C** | Select Colour Temperature and Rendering; C827, C83, C85, C865, C93, C94 |
| LSF | Low Smoke Zero Halogen |
| IND 1500 INFILL | 1500mm Trunking Cover |
| IND 3000 INFILL | 3000mm Trunking Cover |
| IND 4500 INFILL | 4500mm Trunking Cover |
| SUSP IND 3M LO X1 | 3M Suspension Kit Loop Over for Purlins |
| SUSP IND 3M BF X1 | 3M Suspension Kit Barrel Fix |
| WH | White (please add to both tray and trunking if white is required) |
Downloads
Find out more about
Indeco Highbay
For Sales and Technical Enquires call 01747 858100