COLDBAY
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque tempor, purus facilisis accumsan luctus, elit metus faucibus sem, ac tempus.
Introduction
For industrial freezers and cold storage units the Coldbay provides an ideal lighting solution where energy efficiency and minimum cost of ownership are paramount. The Coldbay is capable of operating in ambient temperatures of -40 degrees to +25 degrees centigrade and is supplied with an optional remote gear pack for both mains drivers and emergency components. This allows for quick and simple maintenance of these parts outside the cold storage area whilst also ensuring that the luminaire emits the minimum of heat into the chilled environment. Where freezer construction does not allow for remote gear packs, integral control gear versions are available whilst standalone non maintained emergency luminaires can be offered to work alongside these to provide emergency lighting without remote batteries.
The Coldbay is supplied with an optional integral sensor providing presence detection without any need to modify the external wiring, only live, neutral and earth connections are required. The R11 sensor is also designed to operate in ambient temperatures as low as -40 degrees centigrade and allows the luminaire to be turned off or dimmed to a low level for safety lighting during periods of absence. Combining the efficiency of LED and integral sensor controls allows energy savings of 80-90% when compared to a traditional HID installation.
The luminaire housing is rated to IP65 and can be offered in a wide range of lumen outputs, three lens optics including open area, high rack and ultra high rack and also with basic, self test or autotest emergency. This range of options allows the luminaire to be configured to suit a range of mounting heights, racking aisles and open areas. We offer a range of wireless control systems providing localised grouping and control as well as comprehensive wireless solutions allowing both standard and emergency luminaires to be centrally monitored.
COLDBAY complies with:
UKCA | CE | IP65 | TM21: L90>60K HOURS / L80>90K HOURS | 3 STEP MACADAM ELLIPSE
Recommended applications:
Warehousing
Specification
Construction
- Housing: 0.7mm CR4 steel
- Finish: Polyester powder painted BS 00E55 matt white 60% gloss
- Lens: Injection moulded polycarbonate lens
- IP65
- Remote gear housing for both emergency gear and mains drivers ensures that maintenance of these components can be undertaken outside the cold store area and also ensures the luminaire emits minimum heat to the chilled environment. Non emergency versions with integral gear are available if required.
Performance
- Part L2 compliant
- 3SDCM Three step Macadams ellipse
- TM21: L90>60K Hours / L80>90K Hours
- Up to 142 luminaire lumens per circuit Watt.
Environmental
- Designed to allow simple replacement of components with commonly available tools in compliance with the Eco Design Directive, please see the installation leaflet for maintenance instructions.
- Powered by European branded drivers and emergency modules ensuring replacement parts are easily sourced.
- Every luminaire is labelled with a unique ID number allowing easy identification of spare parts for the lifetime of the product.
- Contains no single use plastics or polystyrene packaging.
- Supplied in plain card boxes with paper tape ensuring packaging is easily recycled.
- Designed to allow simple disassembly for end of life recycling.
- UK based manufacturing providing local support throughout the product lifetime and minimising transportation miles.
Emergency
- Available with optional standard, self test and autotest integral emergency with lithium batteries for extended warranty and lifetime.
- Optional Reacta-Link wireless emergency for automated centralised reporting.
- Optional Reacta-Control wireless emergency for automated centralised reporting.
- Optional central battery changeover relay
- Available with integral emergency with battery heater system for use at temperatures down to -25°C
Control
- Optional compatibility with a range of dimming systems including DALI, DSI and Switch Dimming
- Optional Integral R11 presence sensor
- Optional integral Reacta-Link for integration with Reacta-Link wireless installations
Installation
- Suitable for surface installation
- Remote gear pack connects with two IP68 connectors for quick replacement of luminaire if required.
Variations
- Available with a wide range of colour temperatures and renderings
- Available in a range of lumen outputs
Product Images
COLDBAY in action
Ordering
Luminaires
|
Control
| Code | Description |
|---|---|
| R11 | Reacta 11, Presence, IP65, Low Temperature, 3-15M |
| RLI | Reacta-Link, Wireless Enabled Luminaire |
| RLS10 | Reacta-Link Wireless, Presence, 5-10M |
| RLS15 | Reacta-Link Wireless, Presence, 10-15M |
| RCS | Reacta-Control Wireless, Presence & Daylight, 2.5-4M |
| Please click here for full details on our wireless controls. | |
Emergency
| Code | Description |
|---|---|
| RLE3 | Remote Lithium Standard Emergency 3 Hour |
| RLS3 | Remote Lithium Self Test Emergency 3 Hour |
| RLA3 | Remote Lithium Auto Test Emergency 3 Hour |
| RLA3RC | Remote Lithium Reacta-Control Emergency 3 Hour |
| RLSTR | Remote Lithium Reacta-Link Emergency 3 Hour |
| CB | Central Battery, Please Specify 110V or 230V when Ordering |
| HNE3 | Integral Standard 3 Hour Emergency, Heater, Suitable for -25°C |
| HNS3 | Integral Self Test 3 Hour Emergency, Heater, Suitable for -25°C |
| HNA3 | Integral Autotest 3 Hour Emergency, Heater, Suitable for -25°C |
Miscellaneous
| Code | Description |
|---|---|
| C** | Select Colour Temperature and Rendering; C827, C83, C85, C865, C93, C94 |
| LSF | Low Smoke Zero Halogen |
Downloads